Fan vibration meter vibration sensor EN-080/ST-A3B1/

EN-080/ST-A3B1/vibration speed sensor, TRLV type vibration speed sensor and DYZ-W vibration monitor or DYZ-L vibration intensity monitor can be connected to measure various displacements and speeds. The rotor supported by the rolling bearing transmits the vibration to the bearing cover, and the TRLV type vibration speed sensor mounted on the bearing cover cuts the magnetic line by the internal moving coil to output the voltage, and provides a signal to the monitoring instrument for monitoring the mechanical failure. .

1. Measuring range: Frequency: 10 ~ 300Hz
Amplitude: 0 to 200um 0 to 500um 0 to 800um (peak to peak)
Intensity: 0 ~ 20mm / s 0 ~ 25mm / s 0 ~ 50mm / s (true RMS)

2. Measurement accuracy: ±0.5, linear error ≤1%FS
3. Measurement method: vertical or horizontal
4. Output signal: current output: 4 ~ 20mA (load ≤ 1KΩ)
5. Ambient temperature: -10 ~ 65 ° C (relative humidity ≤ 85%)
6. Power supply voltage: DC24V (power consumption ≤ 3W)
7. Dimensions: 35 × 75 (mm)
8. Fixed screw hole: M10×1.5×10mm

EN-080/ST-A3B1/vibration speed sensor

Second, the basic principles

The basic principle of the CD-21 series speed sensor is based on an inertial mass (coil assembly) and a housing in which a magnet is fixed. When the inertial mass is suspended from the housing by the elastic element, the sensor housing is fixed to the vibrating body. Above, this

SG-2 Vibration Speed ​​Sensor The vibration speed sensor is usually used to measure the vibration of the bearing and, in a few cases, to measure the vibration of the shaft. When measuring the vibration speed, if the sensor is installed incorrectly or the installation is not strong, the measurement result may be distorted or the sensor may be damaged due to vibration. Therefore, we must carefully choose the installation method of the vibration speed sensor. The vibration sensor is used together with the vibration monitor to achieve continuous long-term monitoring and is suitable for measurement of mechanical vibrations such as steam turbines, fans, pumps, and coal mills. The working principle is based on a primary component that converts mechanical energy into electrical energy. It is solidified by two coils





TRLV-8 vibration speed sensor

Goodsense Passenger Stair advantages:

STB44 passenger stair is a kind of special ground support equipment to ensure comfortable embarkation of passengers aboard the plane. Different from the tow tractors, the passenger stair is only used to embark the passengers.

 

Product Highlight:

Large span supporting, good stability, multiple protection and emergency measures,

Adopt wide view glass window in both front and back for safe driving and large angle observation

Advanced hydraulic technology ensures the stable performance and low failure rate.

High quality material for the platform structure

Flexible structure for different aircraft doors.

 

General

 

 

 

Model

 

STB44

Power Type

 

Electric

Service Weight

kg

7500

Overall Length

mm

6650

Overall Width

mm

2240

Height

mm

3400

Wheelbase

mm

3000

Travel Speed (No Load)

km/h

30

Wheel Thread (F/R)

mm

1730/1730

Max Load Capacity

 

6000KG/80 persons

Front Platform Load Capacity

 

750KG/10 persons

Mid Platform Load Capacity

 

600KG/8 persons

Fixed Ladder Load Capacity

 

2550KG/ 34 persons

Scroll Ladder Load Capacity

 

2100KG/ 28 persons

Front Platform Height (extended)

mm

4400

Front Platform Height (Lowered)

mm

2200

Front Platform Width

mm

1990

Stair Width

mm

1290

Stair Title Angle

degree

35

 

Passenger Stair
 

 

Application Area:

1.Airport

 

If you have any other questions,please contact us directly.Our forklift are all with high quality,and you can choose any other engine to equip.It can be produced according to your idea.And we invite you to visit our factory.

Passenger Stair

Passenger Stair,High Efficient Passenger Stair,Useful Passenger Stair,Aircraft Towing Tractors

ZHEJIANG GOODSENSE FORKLIFT CO.,LTD , https://www.goodsenseforklift.com